|
Fiesta Portable (Powder Coated Steel) F1.P
The F1.P is a fully self contained heater fuelled by an LPG cylinder contained in a decorative metal lift up cover. Available with corporate colour scheme and logo for special bulk orders. Each Mobile Heater incorporates a safety package consisting of a tilt switch / interrupter which comes into effect if the heater is jolted suddenly or tilted more than 30° from vertical.
Available in black, white or green
• THREE YEAR GUARANTEE, subject to annual servicing.
• Durable corrosion resistant construction specifically for outdoor use.
• Heat input 12kW (41,000 BTU/h).
• Gas type: Liquid Petroleum Gas LPG.
• Flame protection by 100% shut off thermo electric valve.
• Ignition of pilot by piezo igniter.
• Colours available - White, Black or Green. Corporate colour schemes and logos can be provided for bulk requirements.
• Bottle cover houses up to 13kg LPG cylinder.
• The unit incorporates a hollow base which must be filled with ballast before use (not supplied).
• Standard overall height: 2260 mm
• Width at widest point: 860 mm
LOCATION & COVERAGE
A single heater will provide warmth with a diameter of up to 6 metres, depending on weather conditions. Maintaining a comfort level in a sheltered area is easier than in an exposed area. If possible locate heaters in places sheltered from winds, near buildings, walls, fences etc.
Groups of heaters can be used to heat large areas, positioning them to give overlapping heat patterns. This gives an all round radiant warmth for even greater comfort.
LOCATION HEATER SPACING
Well shielded areas, mild climate Up to 6m
Shielded 2 sides, average climate 4.25m
Little shielding, cool climate 3m
Exposed, cold climate 2.5m
ACCESSORIES & OPTIONS.
• Circular Table Top. Fits around pole above bottle cover.
• Telescopic Pole. Lowers down into bottle cover for ease of storage and/or transportation.
• Wheel Attachment. Permanently fixed wheels for easy movement of portable heaters.
• Clamp Down Lugs. Used to screw heater down to the floor for security in exposed locations.
• Burner Cover Bag. For winter protection.
• Tip Over Protection. Cuts off gas supply to burner if heater is tipped over.
• Sack Trolley. To assist in transportation.
• Factory Pre-assembly. Pre-assembly option (excludes ballast).
• Special Colour Options. Corporate colour schemes and logos for special bulk order.
• Alternative Heights. Extra high & lower height heaters can be supplied to special order.
• Extended Guarantee. Available
IMPORTANT - SAFETY
Combustible Materials. Heaters must be located such that the indicated safety clearance distances from combustible materials are ensured.
Storage and handling of gas bottles must be carried out in accordance with local codes of practice. After connecting the gas supply to a heater, always check for gas leaks using a soap solution.
Refer to the manufacturer's Assembly and Use Instructions for further information.
Designed for outdoor use only, with adequate high and low level ventilation. |
Giant Umbrellas
